Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott Four-Drawer Chest

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 2

WALL MOUNTING HARDWARE

Made in Vietnam - r04 Page 1 of 5

Thank you for purchasing the Abbott Four Drawer

Chest. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

ABBOTT FOUR DRAWER CHEST

Missing hardware?

Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

4 - drawer bottoms

16 - cams14 - wood

dowels

1 - bottom panel

1 - top

crossbar

1 - top

panel

2 - crossbars

(1 front, 1 back)

16 - cam

screws

32 - large

screws

32 - small

screws

4 - drawer backs4 - drawer fronts 8 - drawer sides

(4 left, 4 right)

2 - back

panels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

1 - wall strap

1 - wall screw

1 - washer

Summary of content (5 pages)

PAGE 1
ABBOTT FOUR DRAWER CHEST ASSEMBLY HARDWARE 14 - wood dowels 16 - cam screws 32 - small screws 32 - large screws 16 - cams Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Abbott Four Drawer Chest. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT FOUR DRAWER CHEST NOTE: Do not over tighten the cam screws right side panel A top panel B bottom panel NOTE: Make sure arrows on each cam point toward nearest edge with holes 1 A) Insert 6 cam screws into top panel as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. B) Insert 4 wood dowels and 4 cams into bottom panel as shown. Make sure arrows on each cam point toward nearest edge with holes.
PAGE 3
ABBOTT FOUR DRAWER CHEST top panel back panel 5 With the assistance of another adult, place assembled unit upright as shown. Fit dowels of assembled unit into corresponding holes of top panel. Secure all cams. 6 Attach 2 back panels to assembled unit with 32 small screws as shown. drawer front right drawer side left drawer side 7 Attach left and right drawer sides to drawer front with 4 large screws as shown, using a screwdriver.
PAGE 4
ABBOTT FOUR DRAWER CHEST drawer back 9 Attach drawer back to drawer sides with 4 large screws as shown. Repeat steps 7-10 for remaining drawer assemblies. 10 Fit drawer glides of drawer assemblies into corresponding glides of chest as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in Vietnam - r04 Customer Service 800.967.
PAGE 5
ABBOTT FOUR DRAWER CHEST SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A. Insert wall screw (not included) through end of wall strap and into wall as shown. B. Insert wall screw (included) and washer through end of wall strap and into the top back of unit as shown.