Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott Low Cabinet

COMPONENTS

Made in China - r02 Page 1 of 5

Thank you for purchasing the Abbott Low Cabinet. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT LOW CABINET

1 - bottom panel

1 - top panel

2 - side panels

(1 left, 1 right)

1 - back panel

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for

replacements.

19 - small

screws

16 - bolts 21 - wood

dowels

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

1 - front frame

1 - fixed shelf1 - crossbar

4 - cam

screws

4 - cams

14 - large

screws

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

wall screw

5 - crossbar

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
ABBOTT LOW CABINET ASSEMBLY HARDWARE 19 - small screws 4 - cam screws 14 - large screws 4 - cams 5 - crossbar 16 - bolts screws 21 - wood dowels Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Abbott Low Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT LOW CABINET NOTE: Do not over tighten the cam screws A left and right side panel NOTE: Make sure arrows on each cam point toward nearest edge with holes front frame B bottom panel 1 A) Insert 5 wood dowels into left and right side panels as shown. B) Insert 4 cams into bottom panel as shown. Make sure arrows on each cam point toward nearest edge with holes. 2 With the assistance of another adult, place front frame onto a clean, padded surface as shown.
PAGE 3
ABBOTT LOW CABINET right side panel B fixed shelf B A B bottom panel A front frame 5 A) With the assistance of another adult, position assembled unit as shown. Fit dowels of right side panel into corresponding holes of fixed shelf and bottom panel as shown. Secure right side panel to fixed shelf with 3 bolts, using a screwdriver. B) Secure right side panel to bottom panel with 3 large screws, using a screwdriver.
PAGE 4
ABBOTT LOW CABINET CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. crossbar 9 Fit crossbar into assembled unit and secure with 5 crossbar screws as shown, using a screwdriver. Assembly is now complete. HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
PAGE 5
ABBOTT LOW CABINET OPTIONAL WALL MOUNTING INSTRUCTIONS NOTE: Insert screws 3/4"-1" from the edge of the strap WALL For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. small wall screw wall strap A. Insert small wall screw (included) through end wall strap and into the top back of unit as shown.