Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
1 Place the table top assembly upside down on a clean,
padded surface. Place legs into position, fitting threaded bolts
of each leg through the holes in the metal corner bracket. Secure
each leg to tabletop with 2 washers and 2 hex nuts. Fully
tighten each nut with the hex wrench provided.
ADLER DINING TABLE
HARDWARE
TOOLS REQUIRED
Hex wrench (included)
COMPONENTS
Made in China r01
Page 1 of 1
8 - washers 8 - hex bolts
1 - table top assembly
4 - legs
x 4
Missing hardware? Please call 800.606.6387 for
replacements.
Thank you for purchasing the Adler Dining table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or
polish as the wood is finished with a protective clear
lacquer.