Assembly Instruction

HARDWARE
TOOLS REQUIRED
ASSEMBLY
COMPONENTS
1 Fit center crossbar into each corresponding crossbar
of leg as shown. Secure each leg with 2 small bolts and
2 small washers. Do not fully tighten the bolts.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
2 With the assistance of another adult, carefully position
tabletop face down onto a clean, padded surface as shown.
Align holes of leg assembly with pilot holes of tabletop, and
attach with 8 large bolts and 8 large washers. Do not fully
tighten the bolts. At this point, secure all bolts on crossbar and
tabletop using an allen wrench. Position unit upright.
Assembly is now complete.
Made in China - r02 Page 1 of 1
Thank you for purchasing the Aegean Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
AEGEAN TABLE
Missing hardware? Please call 800.606.6387 for replacements.
8 - large
bolts
8 - small
bolts
8 - small
washers
8 - large
washers
1 - tabletop
1 - center crossbar
4 - legs
leg
center
crossbar
tabletop
large
bolts
large
washers
leg
assembly
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
allen wrench (included)
small
bolts
small
washers
NOTE: Do not fully
tighten the bolts