Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Made in China R05 Page 2 of 4
ALCOVE
HALLWAY SECRETARY
1
2
3
4
A) Attach grooved shelf to left and right side panels
with 4 bolts, 4 large washers, and 4 split washers, as
illustrated above. Secure with a phillips head
screwdriver.
B) Attach bottom shelf to assembled unit with 4 bolts,
4 large washers and 4 split washers. Secure with a
screwdriver.
1
Attach left drawer rail to left side panel and right
drawer rail to right side panel as shown with 4 large
screws as shown. Secure but do not over tighten
screws with phillips head screwdriver.
A) With the assistance of another adult, position
assembly on top of back panel by aligning wood
dowels of side panels with corresponding holes in back
panel. Attach with 4 bolts, 4 large washers, and 4
split washers per side panel. Secure with a phillips
head screwdriver.
B) Attach bottom panel with 3 large wood screws.
Secure each screw with a phillips head screwdriver.
A) Fit front frame onto case assembly, making sure to line
up corresponding dowels and holes. Open doors to
access the case interior.
B) Insert 8 bolts, 8 large washers, and 8 split washers
up through each side panel and into front frame as shown.
Secure with a phillips head screwdriver.
C) Insert 3 large wood screws to secure bottom panel.
Secure each screw with a phillips head screwdriver.
Fit top panel onto dowels of assembled unit. Secure
top panel with 5 bolts, 5 large washers, and 5 split
washers. Secure with a phillips head screwdriver.
Grooved
Shelf
Bottom
Shelf
Front frame
x8
A
A
x8
B
C
A
B
x8
B
x5
B
C
NOTE:
Do not over tighten bolts.
A
Grooved
Shelf
Bottom
Shelf
x3
x3