Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Alcove Hutch Top

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r02 Page 1 of 4

Thank you for purchasing the Alcove Hutch. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALCOVE HUTCH

Missing hardware? Please call 800.606.6387 for replacements.

20 - split

washers

20- flat

washers

20 - bolts

16 - medium

screws

4 - small

screws

8 - large

screws

4 - wood

dowels

2 - drawer

pulls

8 - shelf

pins

6 - wood

plugs

2 - pull

screws

2 - metal

brackets

Phillips head screwdriver (included)

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - right

side panel

1 - top panel

1 -left

side panel

4 - drawer sides

(2 left, 2 right)

2 - drawer backs 2 - drawer bottoms 2 - drawer fronts

2 - adjustable shelves 1 - bottom panel

1 - front frame

2 - drawer rails

(1 right, 1 left)

1 - center panel

1 - back panel

Summary of content (4 pages)

PAGE 1
ALCOVE HUTCH HARDWARE 4 - wood dowels 20 - split washers 4 - small screws 16 - medium screws 2 - drawer pulls 2 - pull screws 20- flat washers 8 - large screws 6 - wood plugs Thank you for purchasing the Alcove Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALCOVE HUTCH A B 1 A) Fit dowels of bottom panel into corresponding holes in left and right side panels. B) Fit dowels of center panel into underside of bottom panel as shown. VIEW FROM BELOW 2 With the assistance of another adult, fit dowels of side panel assembly into corresponding holes in the front frame. Attach assemblies with 4 bolts, 4 split washers and 4 flat washers per side panel. Secure, but do not over tighten each bolt with a phillips head screwdriver.
PAGE 3
ALCOVE HUTCH A B 5 With the assistance of another adult place assembly in an upright position. Attach top panel as shown and secure with 4 bolts, 4 split washers and 4 flat washers. 7 Slide drawer bottom into slot at base of drawer assembly. Made in China r02 6 A) Attach 1 right drawer side to 1 drawer back and 1 drawer front with 4 medium screws. Secure, but do not over tighten with a phillips head screwdriver. B) Attach drawer pull to drawer front with 1 pull screw.
PAGE 4
ALCOVE HUTCH A B 9 A) Insert 8 shelf pins into holes in side panels at desired shelf heights. Fit adjustable shelves into position by inserting at an angle and placing on the shelf pins. B) Align slots on drawer sides with drawer rails and fit into case. Open each drawer half way and insert 1 dowel drawer stop into hole on underside of bottom shelf. 10 With the assistance of another adult, place assembled hutch onto assembled Alcove Storage Cabinet.