Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r03 Page 1 of 2

1 Carefully place top panel face down on a padded surface.

Fit wood dowels of 2 left and right middle supports into

corresponding holes in top panel as shown. Attach with 4

bolts, 4 split washers and 4 flat washers. Secure, but do

not over tighten each bolt with the phillips head screwdriver.

Thank you for purchasing the Open Storage Bench.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALCOVE OPEN STORAGE BENCH

Missing hardware? Please call 800.606.6387 for replacements.

12 - split

washers

12- flat

washers

12 - bolts 4 - screws

Phillips head screwdriver (included)

2 - side panels (1 left, 1 right)

2 - middle supports

(1 - left, 1 - right)

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - top panel

1 - bottom panel

1 - back panel

NOTE:

Do not over tighten the bolts.

PAGE 1
ALCOVE OPEN STORAGE BENCH HARDWARE 12 - split washers 12- flat washers 12 - bolts 4 - screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Open Storage Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALCOVE OPEN STORAGE BENCH B A A 2 Fit bottom panel onto corresponding dowels of middle supports. Attach with 4 screws and secure, but do not over tighten with the phillips head screwdriver. 3 A) With the assistance of another adult, fit assembly onto right side panel as shown. Secure with 4 bolts, 4 split washers and 4 flat washers. B) Align groove in back panel with top panel as shown. Slide into position, making sure back panel fits into slot on right side panel.