Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE BENCH

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China - r02

Page 1 of 3

14 - washers

2 - knobs

Missing hardware? Please call 800.606.6387 for

replacements.

Thank you for purchasing the Alcove Storage Bench.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

2 - side panels

(1 left, 1 right)

1 - top panel

14 - split washers 14 - bolts

1 - back panel

2 - knob screws

8 - wood

screws

1 - front panel 1 - bottom panel

1 Lay front panel face down on a padded surface. Fit

dowels of 2 side panels into corresponding holes in front

panel. Insert 2 bolts, 2 split washers and 2 washers

through each side panel and into front panel and loosely

attach. Do not fully tighten bolts.

x 4

PAGE 1
ALCOVE STORAGE BENCH HARDWARE Thank you for purchasing the Alcove Storage Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ALCOVE STORAGE BENCH NOTE: Do not over tighten the screws. x4 x4 2 Fit bottom panel into position as shown. Secure with 4 wood screws and a phillips head screwdriver. At this point fully tighten the bolts from Step 1 with a phillips head screwdriver. 3 Align dowels in side panels with corresponding holes in the back frame and fit into position. Secure with 2 bolts, 2 split washers and 2 washers per side panel.
PAGE 3
ALCOVE STORAGE BENCH x2 6 Attach 1 knob to each door with 1 knob screw. Fully tighten each with a phillips head screwdriver. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r02 Page 3 of 3 Customer Service 800-967-6696 | http://www.crateandbarrel.