Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Alcove Wall Organizer

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE WALL ORGANIZER

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Made in China - r05

Page 1 of 1

3 - long

screws

3 - drywall

anchors

x 3

Missing hardware? Please call 800.606.6387 for

replacements.

Thank you for purchasing the Alcove Wall Organizer.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely install this product.

INSTALLATION INSTRUCTIONS

There are 2 types of hardware included, 1 group for drywall

installation and 1 group for installation directly into a wall stud. Be

sure to use hardware appropriate for your wall type. Whenever

possible, attach mounting hardware into a wall stud.

If you are unsure about your wall type or what mounting method

you should use, consult a qualified professional or your local

hardware store.

1. Determine the wall location and place the wall bracket into

position. Make sure the pointed side of the bracket points up.

There are 8 holes in the bracket. Choose 3 of these holes for

anchoring into the wall, aligning at least 1 hole with a wall stud if

possible. Level and mark the 3 hole locations on the wall.

2. If attaching directly into wall studs, skip to Step 4.

3. For drywall installation, insert 1 hollow wall anchor at each

marked hole location, tightening with a phillips head screwdriver

until the head of each anchor is flush to the wall surface.

4. Insert 1 screw (long screw for drywall, medium for stud

installation) through each hole in the wall bracket and into the

corresponding anchors or studs in the wall. Fully tighten each

screw with a phillips head screwdriver but do not over tighten.

5. With the assistance of another adult, fit the angled bracket on

the back of the the unit onto the wall bracket. Make sure the unit is

firmly seated in the wall bracket. Installation is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners.

Wall bracket

with pointed

side up

3 - medium

screws

For drywall installation:

For installation directly

to wall studs: