Assembly Instruction

HARDWARE

Thank you for purchasing the Alden Four-Drawer

Chest. This page lists all the contents included in the

box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

NOTE: 2 people are required to safely assembly this

product.

COMPONENTS

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

ALDEN FOUR-DRAWER CHEST

Page 1 of 3

Made in Thailand - r04

Missing hardware? Please call 800.606.6387 for replacements.

48 - screws 27 - bolts

2 - side frames

(1 left, 1 right)

1 - front frame

1 - back frame

1 With the assistance of another adult, fit dowels of left

and right side panels into corresponding holes in back

frame as shown. Loosely attach each side panel with 4

bolts. Do not fully tighten the bolts.

8 - pull screws 8 - drawer pulls

4 - drawer

fronts

8 - drawer sides

(4 left, 4 right)

4 - drawer

backs

4 - drawer

bottoms

1- top panel

PAGE 1
ALDEN FOUR-DRAWER CHEST HARDWARE 48 - screws 27 - bolts 8 - pull screws Thank you for purchasing the Alden Four-Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to safely assembly this product. 8 - drawer pulls Missing hardware? Please call 800.
PAGE 2
ALDEN FOUR-DRAWER CHEST 2 Fit front frame into position, aligning dowels in side frames with corresponding holes in front frame. Secure from the inside with 4 bolts per side frame. Do not fully tighten the bolts. A B 3 Fit top panel into position, aligning dowels in side frames with holes in top. Attach top with 11 bolts. At this point, fully tighten all bolts installed in Steps 1 & 2 with the allen wrench. NOTE: Do not over tighten the screws. C B 4 A.
PAGE 3
ALDEN FOUR-DRAWER CHEST 6 With the assistance of another adult, turn assembly upright. Fit drawer glide hardware into corresponding glide hardware on the case interior. Applying even pressure to each side of the drawer front, firmly push drawer into case glides.If the drawer fronts are not aligned, minor vertical adjustments can be made by loosening the drawer glide screw as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.