Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN 25" ROUND MIRROR
Page 2 of 2
Made in China - r03
2 Place plywood back on top of mirror, between
the spacers.
3 Secure 6 mounting tabs to back of frame assembly
with 6 screws, leaving 2 holes open as shown. Tighten
each screw with a phillips head screwdriver.
4 Insert 2 screws through the hanging wire and 2
mounting tabs and into the mirror frame as shown. Fully
tighten all screws with a phillips head screwdriver.
CLEANING AND CARE
Clean metal surfaces with a dry or damp soft cloth.
Clean mirror with a glass cleaner.
Do not use abrasive cleaners on the mirror or frame.
HANGING INSTRUCTIONS
Please note that hanging hardware is not included with
this mirror. Use hardware appropriate for your wall type. If
you are unsure about your wall type, consult a professional or
your local hardware store. Whenever possible, hanging
hardware should be installed in a wall stud.
CAUTION: Use extreme caution when hanging heavy
objects on the wall. Improper anchoring may result in serious
injury.