Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALDEN STORAGE BENCH

HARDWARE

TOOLS REQUIRED

Phillips Head Screwdriver

COMPONENTS

Made in China R06

Page 1 of 3

8 - small

screws

Missing hardware? Please call 800.606.6387 for

replacements.

18 - spring

washers

Thank you for purchasing the Alden Storage Bench.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

1 - top panel

1 - bottom panel

1 - front panel

1 - left side panel

1 - right side panel

1 - back panel

8 - small

washers

10- large

washers

18 - large

screws

1 With the assistance of another adult, place front panel on

padded surface. Attach bottom panel to back of front panel

with 3 large bolts, 3 spring washers and 3 large washers

Turn Phillips head screwdriver clockwise to fasten.

x 3

2 - top supports

PAGE 1
ALDEN STORAGE BENCH HARDWARE 8 - small screws 18 - spring washers Thank you for purchasing the Alden Storage Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ALDEN STORAGE BENCH x3 2 Carefully attach assembled unit to back panel with 3 large bolts, 3 spring washers, and 3 large washers. Fasten using Phillips head screwdriver. 3 Carefully slide top panel into groove provided on back panel. Do not fasten top panel until both side panels are attached. A x8 B x2 x4 4 A) Fit right and left side panels and bottom panel onto wood dowels of assembled unit. Secure side panels with 8 large bolts, 8 spring washers and 8 small washers. B) Flip assembly over.