Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
Thank you for purchasing the Alden Twin Bed. This
page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
TOOLS REQUIRED
Allen Wrench (included)
Phillips Head Screwdriver
ALDEN TWIN BED
Page 1 of 2
Made in Thailand - r04
Missing hardware? Please call 800.606.6387 for
replacements.
6 - small screws 8 - bolts
1 - headboard
1 - foot board
1 With the assistance of another adult, fit dowels of side
rails into corresponding holes in headboard. Insert 2 bolts,
2 split washers and 2 flat washers through holes in each
metal bracket and into the headboard. Fully tighten each bolt
with the allen wrench.
8 - flat washers 8 - split washers
2 - side rails (1 right, 1 left)
x 2
1 - slat assembly

Summary of content (2 pages)