Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing the Alden Full or Queen

Bed. This page lists all the contents included in the

box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

ALDEN FULL, QUEEN BED

Page 1 of 2

Made in Thailand - r04

Missing hardware? Please call 800.606.6387 for replacements.

6 - large screws 8 - bolts

1 - headboard

1 - footboard

1 With the assistance of another adult, fit dowels of side

rails into corresponding holes in headboard. Insert 2 bolts,

2 split washers and 2 flat washers through holes in each

metal bracket and into the headboard. Fully tighten each bolt

with the allen wrench.

8 - flat washers 8 - split washers

4 - small screws

2 - side rails

(1 right, 1 left)

x 2

1 - slat

assembly

1 - center

rail

1 - adjustable

support

leg

TOOLS REQUIRED

Allen Wrench (included)

Phillips Head Screwdriver

PAGE 1
ALDEN FULL, QUEEN BED HARDWARE 4 - small screws 6 - large screws 8 - flat washers 8 - bolts 8 - split washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Alden Full or Queen Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALDEN FULL, QUEEN BED Metal brackets face down x2 2 Attach foot board to each side rail with 2 bolts, 2 split washers and 2 flat washers. Secure all bolts with the allen wrench. 3 Fit bracket of adjustable support leg onto center rail, aligning corresponding holes. Make sure brackets at rail ends face down as shown. Attach with 4 small screws and secure with a phillips head screwdriver.