Assembly Instruction

TOOLS REQUIRED

allen wrench (included)

phillips head screwdriver

1 - small

screw

4 - large

screws

8 - bolts

8 - spring

washers

8 - flat

washers

1 - cushion 4 - legs

2 - crossbars

( crossbar A, crossbar B)

Thank you for purchasing the Allegro Ottoman. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware? Please call 800.606.6387 for replacements.

ALLEGRO OTTOMAN

HARDWARE

COMPONENTS

Made in China - r07

Page 1 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

1 Attach crossbars A and B with 1 small screw as

shown. Secure screw with a phillips head screwdriver.

crossbar

PAGE 1
ALLEGRO OTTOMAN HARDWARE 1 - small screw 4 - large screws 8 - spring washers 8 - flat washers 8 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Allegro Ottoman. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALLEGRO OTTOMAN leg NOTE: Bottom cover is not shown for assembly purposes bottom cover cushion NOTE: Bottom cover is fixed to the side and front edges of cushion 2 The bottom cover is fixed to the side and front edges of the cushion as shown. Peel back corners of bottom cover to assemble legs. cushion 2 Fit 2 legs into cushion as shown. spring flat washer washer bolt crossbar assembly 4 Loosely attach each leg with 2 large bolts, 2 spring washers, and 2 flat washers as shown.
PAGE 3
ALLEGRO OTTOMAN bolts flat spring washer washer leg 6 Fit remaining 2 legs to assembled unit as shown. 7 Loosely attach 2 legs with 2 bolts, 2 spring washers, and 2 flat washers per leg as shown. bottom cover NOTE: Large screws are secured at an angle 9 Align velcro of bottom cover back onto the corners of assembled unit as shown. Press firmly to secure. Assembly is now complete. 8 Attach crossbar assembly of assembled unit with 4 large screws as shown. Secure screws with a screwdriver.