Assembly Instruction

1 Attach crossbars A and B with 1 small screw as
shown. Secure screw with a phillips head screwdriver.
ALLEGRO SETTEE
3 A) Insert 4 wood dowels into backrest as shown.
B) Fit dowels of backrest into corresponding holes of
seat. Loosely attach with 8 large bolts, 8 spring
washers, and 8 flat washers as shown.
bolt
spring washer
flat washer
A
A
B
B
4 Fit dowels of crossbar assembly into
corresponding holes of assembled unit as shown.
crossbar
assembly
backrest
seat
Made in China - r08
Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
crossbar
A
crossbar
B
NOTE: Make sure
“FRONT” labeled
on each crossbar
is assembled to
the front of the unit
FRONT
FRONT
seat
2 The bottom cover is fixed to the side and front edges
of the seat as shown. Peel back corners of bottom
cover to assemble legs.
bottom
cover
NOTE: Bottom cover
is fixed to the side and
front edges of seat
NOTE: Bottom cover
is not shown for
assembly purposes