Assembly Instruction

ALLEGRO WINE TOWER
Page 3 of 4 Made in China - r07
5 Carefully slide back panel into corresponding grooves
of assembled unit as shown.
8 A) Fit support panel into corresponding slots of leg
assembly as shown.
B) Attach remaining leg to assembled unit as shown with 2
flat washers, 2 spring washers and 2 allen bolts. At this
point, fully tighten all bolts using an allen wrench.
C) Secure support panel with 4 screws using a screwdriver.
Do not over tighten the screws.
6 Fit dowels of assembled unit into corresponding holes of
top panel as shown. Secure with 4 flat washers, 4 spring
washers and 4 allen bolts using an allen wrench.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
back panel
NOTE: Do not over
tighten the screws
top panel
7 Loosely attach 3 legs to assembled unit as shown
with 2 flat washers, 2 spring washers and 2 allen bolts
per leg.
A
support
panel
B
C
leg
C
leg