Assembly Instruction

ALLEGRO WINE TOWER
Page 4 of 4 Made in China - r07
10 Attach pull to drawer assembly with 1 phillips bolt
using a screwdriver.
12 Insert drawer assembly halfway into assembled unit.
Attach 2 drawer pins to fixed panel as shown. Fully insert
drawer assembly into unit.
Assembly is now complete.
11 A) With the assistance of another adult, place unit
upright. Insert 4 shelf pins at desired shelf height.
B) Place adjustable shelf into assembled unit. Make sure
shelf is securely supported by each shelf pin.
C) Fit wine rack assembly into assembled unit as shown.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
pull
A
C
B
adjustable
shelf
shelf
pins
wine rack
assembly
drawer pins
drawer
assembly
NOTE: Make sure
slated edge is
assembled towards
the back
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
9 Slide 3 back wine rack panels into corresponding slots
of 2 front wine rack panels.
back wine
rack panel
front wine
rack panel