Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
5 Using a hammer, attach plastic tube caps to bottom of
the legs. Assembly is now complete.
ALTO HIGH DINING TABLE
Page 2 of 2 Made in China
2 A. Slide bottom rail over tube fitting.
B. Secure with 2 machine screws. Do not fully tighten.
4 A. Place tabletop on the floor with the pre-drilled holes
facing up. With the assistance of another adult, place leg
frame assembly on tabletop, aligning holes in tabletop and
metal brackets on leg frame. Make any necessary
adjustments to the metal frame to make it flush with the
edges of the tabletop. At this point, fully tighten all machine
screws with the allen wrench.
B. Secure tabletop to frame with 10 wood screws and 10
washers. Fully tighten with a phillips head screwdriver.
3 A. Fit other leg frame into ends of top & bottom rails.
B. Secure leg frame to rails with 2 machine screws per
rail. Do not fully tighten.
A
B
A
B
CLEANING AND CARE
Clean wood surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
B
A
x 12