Assembly Instruction

HARDWARE

Thank you for purchasing the Antenna Bookcase.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

2 - back legs

(1 left, 1 right)

5 - glass tops

1 - crossbar

2 - front legs

(1 left, 1 right)

1 - 4th shelf

1 - 5th shelf

Page 1 of 3

Made in Taiwan - r03

ANTENNA BOOKCASE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

24 - small

bolts

2 - large

bolts

20 - adhesive

pads

4 - adjustable

feet

allen wrench (included)

8 - medium

bolts

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

2 - screws

2 - plastic

anchors

2 - brackets

1 - 1st shelf

1 - 2nd shelf

1 - 3rd shelf

PAGE 1
ANTENNA BOOKCASE HARDWARE 24 - small bolts 2 - screws 8 - medium bolts 2 - brackets 2 - large bolts 2 - plastic anchors 4 - adjustable feet 20 - adhesive pads Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Antenna Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ANTENNA BOOKCASE 1 A) Fit brackets of left front and back legs into 5 shelves (in descending order) as shown. Make sure holes on side of each shelf corresponds with holes of left front leg. Loosely attach each shelf with 1 medium bolt as shown with an allen wrench. Do not fully tighten bolts until all bolts are installed. B) Repeat step 1A for right front and back legs as shown.
PAGE 3
ANTENNA BOOKCASE OPTIONAL WALL MOUNTING ASSEMBLY A bracket glass top B 4 Carefully place 1 glass top onto each shelf. Make sure each glass top is securely supported by each adhesive pad. Assembly is now complete. B 5 A) Carefully remove 1st glass top and set aside. Remove 2 inside small bolts from 1st shelf and attach brackets to 1st shelf. Reattach with 2 small bolts and replace glass top. B) Determine final location of unit. Mark position on the wall and drill a hole in the wall stud.