Assembly Instruction

ANTENNA DESK
Made in Taiwan - r01 Page 2 of 2
3 With the assistance of another adult attach large
crossbar to front and back leg assembly with 4 large
bolts per crossbar as shown. At this point fully tighten
all bolts with an allen wrench.
4 A) Attach 6 adhesive pads to assembled unit as shown.
B) Attach 4 adjustable feet to assembled unit as shown.
Turn feet clockwise to secure.
5 With the assistance of another adult, carefully place
tabletop onto assembled unit. Make sure tabletop is securely
supported by each pad. Assembly is now complete.
2 Loosely attach left and right front legs to small
crossbar with 2 small bolts per leg.
small
crossbar
left
front leg
right
front leg
NOTE: Do not fully
tighten the bolts
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
B
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
large crossbar
A
long crossbar
back leg
assembly
front leg
assembly
tabletop
adhesive pad
adjustable foot
B
A