Assembly Instruction

ARBOR HIGH DINING/BAR TABLE
Made in China - r06 Page 3 of 3
7 A) Fit drawer into assembled unit as shown.
B) Insert 8 shelf supports into assembled unit at desired
shelf height as shown.
C) Place left and right adjustable shelves securely onto
each shelf support of assembled unit as shown. NOTE:
Make sure arrow marked on the bottom of each shelf is
pointing towards the front panel.
Assembly is now complete.
5 A) With the assistance of another adult, carefully
position unit upright. Insert 4 wood dowels into
assembled unit as shown.
B) Fit 2 crossbars onto assembled unit as shown.
B
crossbars
A
C
drawer
left and right
adjustable
shelves
B
B
6 A) Fit corresponding holes of top panel to dowels of
assembled unit. Attach back frame of assembled unit to
top panel with 3 long bolts as shown. Secure bolts
with an allen wrench.
B) Attach side and middle panels of assembled unit to
top panel with 4 short bolts as shown.
top panel
A
B
A
B
A
long bolts
short bolts
NOTE: Make sure arrow marked on the bottom
of each shelf is pointing towards the front panel.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | www.crateandbarrel.com
NOTE: The end leaves of
the top panel are hinged,
please be careful when
attaching to the unit.