Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Arbor 7-Pc.Ensemble/ L rect. table, 5 chairs, L bench

ARBOR RECTANGULAR DINING TABLE

Made in Vietnam R03 Page 1 of 2

Thank you for purchasing the Arbor Rectangular

Dining Table. This page

lists all the contents included

in the box. Please take the time

to identify the

hardware as well as the individual components

to this

product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to

protect them from damage.

Note: 2 people are required to safely assemble this

product.

HARDWARE

COMPONENTS

1 - table top

4 - legs

With the assistance of another adult, carefully lay top

panel face down on padded surface.

Missing hardware?

Please call 800.606.6387 for replacements.

8 - nuts 8 - washers 1 - umbrella cap

TOOLS REQUIRED

Hex wrench (included)

Summary of content (4 pages)

PAGE 1
ARBOR RECTANGULAR DINING TABLE HARDWARE 8 - nuts 8 - washers 1 - umbrella cap Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Arbor Rectangular Dining Table. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ARBOR RECTANGULAR DINING TABLE X4 2 Insert 4 legs into under side of table top, fitting leg bolts through holes of corner blocks. 3 Attach each leg with 2 washers and 2 nuts. Secure each leg by turning all nuts clockwise with the included hex wrench. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Treat with Crate & Barrel's Hardwood Protector or allow the finish to weather to a silvery gray. 4 With the assistance of another adult, place table upright.
PAGE 3
ARBOR LARGE BENCH HARDWARE 8 - large bolts 4 - medium bolts 4 - small bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Arbor Large Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 4
ARBOR LARGE BENCH IMPORTANT: During assembly, lift both sections of leg assembly to prevent damage as shown A leg assembly A B B seat 2 A) Fit notches of leg assembly into seat as shown. Loosely attach corner legs with 4 small bolts. B) Loosely attach center legs with 4 medium bolts. At this point, fully tighten all bolts with an allen wrench. Position unit upright. Assembly is now complete. NOTE: Do not fully tighten bolts until all bolts are installed.