Assembly Instruction

ManualsBrandsCrate & Barrel ManualsChairsCrate & Barrel Arbor Chaise Lounge Chair

Made in Bolivia - r16 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ARBOR CHAISE LOUNGE

HARDWARE

TOOLS REQUIRED

2 - allen wrenches (included)

flat head screwdriver

2 - bolts (A)

(6 x 75)

Missing hardware? Please call

800.606.6387 for replacements.

Thank you for purchasing the Arbor Chaise Lounge. This

page lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare for

assembly, place the contents on a carpeted or padded area

to protect them from damage.

Note: 2 people are required to safely assemble this product.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. We recommend the use of outdoor

furniture covers during inclement weather. Treat with Crate

and BarrelÕ s Roble protector or allow the finish to weather to

a silver gray.

4 - barrel

nuts (F)

4 - bolts (B)

(6 x 60)

2 - bolts (C)

(6 x 45)

2 - spacers (D) 6 - bolt

caps (E)

ASSEMBLY

Step 1) Insert 2 barrel nuts (F) into

seat frame. Make sure barrel cam

holes are aligned with corresponding

holes in seat frame. Attach each side

frame to seat frame with bolt (A),

using an allen wrench. Make sure bolt

(A) is fully engaged with barrel nut (F).

Using a flat head screwdriver, turn

barrel nut (F) clockwise to secure.

Step 2) Attach each side frame to seat

frame with 1 bolt (C) and 1 bolt cap (E).

With an allen wrench, hold bolt cap (E) and

tighten bolt (C) with remaining allen wrench.

Insert 2 barrel nuts (F) into crossbar and attach

each side with 1 bolt (B).

Step 3) Attach seat frame to back frame with 1

bolt (B), 1 spacer (D) and 1 bolt cap (E).

Step 4) Fit notches of leg frame into seat frame, and

secure each side with 1 bolt (G) and 1 bolt cap (E).

Assembly is now complete.

STEP 3

STEP 2

STEP 4

STEP 1

back frame

left side

frame

right side frame

seat frame

crossbar

NOTE: Do not over

tighten the bolts

leg

frame

2 - bolts (G)

(6 x 35)