Assembly Instruction

ARBOR BENCH
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during
inclement weather.
Treat with Crate and Barrel’s Roble Protector
or allow the finish to weather to a silver gray.
Made in Bolivia - r10
Page 2 of 2
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
2 STEP 1) Position seat upside down onto a clean,
padded surface as shown. Fit notches of leg assembly
into seat as shown.
STEP 2) Per diagram, loosely attach each leg with
corresponding bolts (A or B) and 1 bolt cap (D). With 1
allen wrench, hold cap and fully tighten large bolt with
remaining allen wrench. Do not fully tighten until all bolts are
installed. Position unit upright. Assembly is now complete.
seat
leg assembly
NOTE: Do not fully tighten
bolts until all bolts are
installed.
A
D
D
D
A
A
A
A
D
D
B
D
D
B
D
D
B
B
STEP 1
STEP 2