Assembly Instruction

ARBOR OTTOMAN

Thank you for purchasing the Arbor Ottoman This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

2 - allen wrenches

(included)

1 - top panel

2 - leg

frames

4 - bolts

4 - bolt

caps

Made in Bolivia - r05 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
ARBOR OTTOMAN HARDWARE 4 - bolts 4 - bolt caps Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Arbor Ottoman This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ARBOR OTTOMAN 1 A) Position top panel upside down onto a clean, padded surface as shown. Fit notch of each leg into corresponding corner of top panel as shown. B) Attach each leg with 1 bolt and 1 bolt cap. With 1 allen wrench, hold cap and fully tighten large bolt with remaining allen wrench. Position unit upright. leg A notch Assembly is now complete. bolt B B top panel cap CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.