Assembly Instruction

HARDWARE

1 A. Determine wall mounting location. Tape wall template

into position making sure all holes are level.

B. If attaching directly to a wall stud, do not use the wall

anchors. Fasten each screw directly into the stud.

C. Drill a 3/16"dia hole at each end of the template where

indicated.

D. Remove wall template and insert a phillips head

screwdriver into the wall anchor and insert into the holes while

turning each anchor clockwise. Fully tighten until the anchor is

seated flush with the surface of the wall.

E. With a screwdriver, insert the screw into the hole of the

anchor. Leave 3/16" of the screw protruding out from the

surface of the wall.

F. Carefully align keyhole hardware on back side of the shelf with

the protruding screws in the wall and fit securely into place.

Installation is now complete.

Thank you for purchasing the Archetype Wall

Ledge. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this

product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

TOOLS REQUIRED

Phillips head screwdriver

Drill & 3/16" diameter drill bit

WALL MOUNTING INSTRUCTIONS:

The wall mounting hardware included with this shelf is

intended for drywall installation only. Be sure to use

hardware appropriate for your wall type. Whenever

possible, fasten screws directly into a wall stud.

If you are unsure about your wall type or what mounting

method you should use, consult a qualified professional or

your local hardware store.

ARCHETYPE 3’ AND 4’ WALL LEDGES

Page 1 of 1

Made in China - r02

Missing hardware? Please call 800.606.6387 for

replacements.

3 - drywall anchors

1 - wall template

3 - screws

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.