Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
COMPONENTS
Thank you for purchasing the Archetype Large Box
Wall Shelf. This page lists all the contents included in
the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
TOOLS REQUIRED
Phillips head screwdriver
Drill & 3/16" diameter drill bit
x 2
ARCHETYPE LARGE BOX WALL SHELF
Page 1 of 2
Made in China - r04
Missing hardware?
Please call
800.606.6387 for
replacements.
2 - drywall anchors
1 - wall template
2 - wall screws
2 - short panels
2 - long panels
8 - lock sleeves 8 - lock screws
1 Align holes in 4 lock sleeves with 4 holes in each long
panel. Insert 1 lock screw through each sleeve and into
the long panel. Make sure to orient lock sleeves as shown.
Fully tighten each screw with a phillips head screwdriver.
2 Align lock sleeves with holes in the short panels. Make
sure keyhole hanging hardware on each short panel faces
the same direction. Firmly press all panels together until the
assembly is secure.
IMPORTANT NOTE:
Make sure the keyhole
hanging hardware on
each short panel faces
the same direction
Attach lock
sleeves in
this position