Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Aspen Desk

HARDWARE

TOOLS REQUIRED

COMPONENTS

Customer Service 800.967.6696 | www.crateandbarrel.com

Made in Vietnam r07 Page 1 of 2

Thank you for purchasing the Aspen Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASPEN DESK

Missing hardware? Please call 800.606.6387 for replacements.

1 - table top

2 - back

legs

(1 left,

1 right)

1 - long crossbar

2 - short crossbars

1 A) Insert 2 cam screws into each left and right

back leg and 1 cam screw into each left and right

front leg as shown. Secure with a flathead

screwdriver, but do not over tighten.

B) Insert 1 barrrel nut and 2 bolts into each leg as

shown. Use a flathead screwdriver to align holes on

nut with holes on leg. Turn bolts clockwise to secure.

1 - front

right leg

1 - front

left leg

front

right leg

front

left leg

back right

and left legs

Hex wrench (included)

Flathead screwdriver

(included)

6 - cams

4 - barrel

nuts

6- cam

screws

8 - bolts 8 - flat

washers

8- spring

washers

8 - screw

nuts

NOTE: Make sure holes

on nut align with holes

on leg.

Summary of content (2 pages)

PAGE 1
ASPEN DESK HARDWARE 4 - barrel nuts 6 - cams 6- cam screws 8 - bolts 8 - flat washers 8 - screw nuts 8- spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Aspen Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ASPEN DESK short crossbar back right leg A B A Make sure arrow on each cam point towards edge with holes. A long crossbar front right leg front left leg B back left leg A front of desk 2 A) With the assistance of another adult, carefully place tabletop face down on padded surface. Loosely attach each corresponding leg onto tabletop as shown. B) Insert 2 flat washers, 2 spring washers, and 2 screw nuts per leg as shown. Do not fully tighten hardware.