Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Avalon 36" Dining Group Black

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand - r02 Page 1 of 2

Thank you for purchasing the Avalon 36” Round Dining

Table. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

AVALON 36” ROUND DINING TABLE

Missing hardware? Please call 800.606.6387 for replacements.

1 - tabletop

(with top and bottom mounting

plate pre-assembled)

1 - pedestal4 - legs

1 With the assistance of another adult, carefully place tabletop

onto a clean, padded surface. Using a large allen wrench,

remove 2 tabletop bolts, 2 spring washers and 2 flat

washers from the bottom mounting plate. Remove the bottom

mounting plate from tabletop. Set hardware aside.

8 - tabletop

bolts

(2 - pre-attached)

4 - plate

bolts

12 - large

flat washers

12 - large

spring washers

2 - wood

dowels

8 - hex

nuts

large allen wrench

(included)

hex wrench

(included)

(We recommend the use of hand tools instead of power tools)

small allen wrench

(included)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - small

flat washers

8 - small

spring washers

Summary of content (2 pages)

PAGE 1
AVALON 36” ROUND DINING TABLE HARDWARE 4 - plate bolts 8 - tabletop bolts 2 - wood dowels 8 - hex nuts (2 - pre-attached) 8 - small flat washers 8 - small spring washers 12 - large flat washers 12 - large spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Avalon 36” Round Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
AVALON 36” ROUND DINING TABLE B NOTE: Do not over tighten the bolts hex nut spring washer flat washer A wood dowel bottom mounting plate leg plate bolt B large spring washer pedestal large flat washer 2 A) Insert 2 wood dowels into pedestal as shown. B) Fit dowels of pedestal into corresponding holes of bottom mounting plate as shown. Attach bottom mounting plate with 4 plate bolts, 4 spring washers and 4 flat washers as shown. Secure, but do not over tighten, bolts with a small allen wrench.