Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
BALCONY OVAL MIRROR
HARDWARE
TOOLS REQUIRED
Phillips head screwdriver
Hammer
CLEANING AND CARE
Use a slightly damp cloth to wipe the mirror.
Do not use furniture polish on the wood frame
as it is finished with a protective lacquer.
Made in Vietnam - r03
Page 1 of 1
Thank you for purchasing the Balcony Wall Mirror.
This page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
4 - screws4 - plastic wall anchors
HANGING INSTRUCTIONS
Important Note:
The wall mounting hardware included with this mirror is intended
for drywall installation only. Be sure to use hardware appropriate
for your wall type. Whenever possible, attach mounting hardware
into a wall stud. If you are unsure about your wall type or what
mounting method you should use, consult a qualified professional
or your local hardware store.
1. Determine where you wish to hang the mirror and mark on the
wall where the 2 anchors should be inserted. Note that the mirror
can be hung vertically or horizontally as shown.
The distance between the center points of the 2 keyhole hanging
brackets is vertically is 22-7/16"; horizontally the distance is 28-
1/4". Make sure the 2 marks are level.
2. Drill 2 holes that are slightly smaller in diameter than the size of
the anchor, but 1/4" deeper than the length of the anchor.
3. Insert 2 plastic anchors so that they are flush with the surface
of the wall. Gently tap with a hammer if necessary.
4. Insert the 2 screws into the plastic anchors, leaving
approximately 1/4" of the screw projecting from the face of the
wall.
5. Hang the mirror on the screw heads, making sure that the screw
head snugly engages the keyhole bracket fitting.
Installation is now complete.
Missing hardware? Please call 800.606.6387 for replacements.