Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY FULL, QUEEN BED

HARDWARE

COMPONENTS

Made in China 2004

Page 1 of 2

Thank you for purchasing the Balcony Bed. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

NOTE: 2 people are required to assemble this product

safely.

1 - headboard

1 - footboard

2 - side rails

2 - support

legs

1 With the assistance of another adult, align holes in

side rail with corresponding holes in headboard. Attach with

2 large screws, 2 large split washers and 2 large washers.

Fully tighten using large allen wrench. Repeat for the other

side rail.

1 - center

cross rail

2 - cross rails

TOOLS REQUIRED

Large allen wrench (included)

Small allen wrench (included)

8 - large screws 2 - small screws8 - medium screws

Missing hardware? Please call 800.606.6387

for replacements.

8 - large

washers

8 - large split

washers

8 - small split

washers

8 - small

washers

x 2

PAGE 1
BALCONY FULL, QUEEN BED HARDWARE 8 - large screws 8 - large washers Thank you for purchasing the Balcony Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to assemble this product safely.
PAGE 2
BALCONY FULL, QUEEN BED x4 x2 2 Align holes in side rails with corresponding holes in footboard. Attach with 2 large screws, 2 large split washers and 2 large washers per side rail. Fully tighten screws with large allen wrench. 3 Place 2 cross rails into position over holes in side rails. Secure with 2 medium screws, 2 small split washers and 2 small washers per rail. Fully tighten screws with small allen wrench. 5 Place center cross rail assembly into position over holes in side rails.