Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand r04 Page 1 of 3

Thank you for purchasing the Boulevard II Nightstand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

BOULEVARD II NIGHTSTAND

Missing hardware? Please call 800.606.6387 for replacements.

4 - long

bolts

2- pull

screws

8 - shoulder

screws

12 - wood dowels 1 - drawer pull

4 - short

bolts

Allen Wrench (included)

Phillips Head Screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - top panel 1 - shelf

2 - side frames

(1 left, 1 right

1 - bottom frame 1 - drawer front

1 - back panel

1 - drawer back 2 - drawer sides

(1 right, 1 left)

1 - drawer bottom

PAGE 1
BOULEVARD II NIGHTSTAND HARDWARE 4 - short bolts 4 - long bolts 12 - wood dowels 2- pull screws 8 - shoulder screws 1 - drawer pull Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Boulevard II Nightstand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
BOULEVARD II NIGHTSTAND NOTE: Do not over tighten the bolts 1 A) Place left side panel face down on a padded surface. Insert 4 wood dowels into the bottom frame as shown. B) Fit dowels of bottom frame into corresponding holes in left side panel. Insert 2 long bolts through bottom frame and secure with the allen wrench. Do not over tighten bolts. 3 Insert 4 wood dowels into shelf as shown, and fit into corresponding holes in the side frame.
PAGE 3
BOULEVARD II NIGHTSTAND A B 4 Place top panel upside down on a padded surface. Insert 4 wood dowels into the holes as shown. Turn case assembly upside down and fit onto wood dowels. Secure top with 4 short bolts. 6 A) Attach right drawer side with 4 shoulder screws. B) Attach drawer pull with 2 pull screws. Secure screws with a phillips head screwdriver. Made in Thailand r04 5 A) Attach the drawer left side panel to the drawer front and drawer back with 4 shoulder screws.