Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Brey Desk

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r05 Page 1 of 3

Thank you for purchasing the Brey Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

BREY DESK

Missing hardware?

Please call

800.606.6387 for

replacements.

1 - desktop

2 - set

screws

1 - crossbar

2 - leg frames

(1 left, 1 right)

1 - glass top

4 - bumpers

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

ASSEMBLY

desktop

16 - flat

washers

16 - spring

washers

12- small

bolts

2 - screw

posts

2 - barrel

nuts

flat head screwdriver

allen wrench (included)

4 - large

bolts

1 With the assitance of another adult, place desktop

onto a clean, padded surface. Fully extend keyboard tray.

Release glides of keyboard tray from glides of desktop as

shown.

keyboard

tray

phillips head screwdriver

Summary of content (3 pages)

PAGE 1
BREY DESK HARDWARE 16 - flat washers 16 - spring washers 12- small 4 - large bolts bolts 2 - screw posts 4 - bumpers 2 - barrel nuts 2 - set screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Brey Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
BREY DESK NOTE: Make sure to align slot of screw post parallel to leg NOTE: Do not over tighten screw posts crossbar left and right leg frame 2 Insert 1 screw post into right leg frame and secure with a flat head screwdriver. Note: Make sure to align slot on top of screw post parallel to leg. Do not over tighten screw posts. Repeat for left leg frame. CORRECTLY ASSEMBLED SIDE VIEW DETAIL left leg frame B crossbar C 3 Insert 2 barrel nuts into the crossbar as shown.
PAGE 3
BREY DESK NOTE: Do not over tighten the screws desktop assembly keyboard tray assembly desktop 5 Secure left and right leg frames to desktop with 6 small bolts, 6 spring washers and 6 flat washers per side as shown, using an allen wrench. 6 With the assistance of another adult, position desktop assembly upright. Fully extend glides of desktop assembly. Fit glides of keyboard tray assembly into corresponding glides of desktop assembly as shown.