Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Brighton Chifforobe

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r02 Page 1 of 5

Thank you for purchasing the Brighton Chifforobe.

This page lists the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON CHIFFOROBE

2 - side panels

(1 left, 1 right)

5 - drawer

fronts

10 - drawer sides

(5 left, 5 right)

5 - drawer

bottoms

5 - drawer

backs

40 - screws30 - bolts

1 - front

frame

1 - back

frame

30 - flat

washers

30 - spring

washers

WALL MOUNTING HARDWARE

Missing hardware? Please call 800.606.6387 for replacements.

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

1 - top

panel

3 - shelves

1 - partition

12 - shelf

supports

1 - bottom

panel

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

Summary of content (5 pages)

PAGE 1
BRIGHTON CHIFFOROBE ASSEMBLY HARDWARE 30 - bolts 30 - flat washers 30 - spring washers 12 - shelf supports 40 - screws WALL MOUNTING HARDWARE Thank you for purchasing the Brighton Chifforobe. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON CHIFFOROBE right side panel bottom panel NOTE: Do not over tighten the bolts back frame 1 Fit dowels of right side panel into corresponding holes of back frame as shown. Secure side panel with 3 bolts, 3 spring washers and 3 flat washers, using a phillips head screwdriver. Do not over tighten the bolts. 2 Fit slot of bottom panel onto corresponding crossbar of back panel as shown. Secure bottom panel to assembled unit with 4 bolts, 4 spring washers and 4 flat washers.
PAGE 3
BRIGHTON CHIFFOROBE top panel front frame 5 With the assistance of another adult, fit dowels of assembled unit into corresponding holes of front frame as shown. Secure front frame with 6 bolts, 6 spring washers and 6 flat washers. 6 With the assistance of another adult, position unit upright as shown. Fit dowels of assembled unit into corresponding holes of top panel, and secure with 14 bolts, 14 spring washers, and 14 flat washers.
PAGE 4
BRIGHTON CHIFFOROBE drawer right side 9 Fit dowels of drawer assembly into corresponding holes of drawer right side and secure with 4 screws as shown. Repeat steps 7-9 for remaining drawer assemblies. 10 Insert drawer assemblies into the case, fitting wheels of drawer glides into rails of case glides. A B A shelves CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.
PAGE 5
BRIGHTON CHIFFOROBE C plastic anchor F wall strap wall bracket wall bracket large D screw A 12 small screw Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Locate pilot holes on back of unit and attach wall bracket using 2 small screws as shown.