Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r01 Page 1 of 2

Thank you for purchasing the Brighton Daybed.

This page lists the contents included in the box.

Please take time to identify the hardware as

well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON DAYBED

Missing hardware? Please call 800.606.6387 for replacements.

12 - screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

unit is finished with a protective clear lacquer.

2 - side panels

(1 left, 1 right)

1 - slat assembly

1 - center rail

1 - front panel

1 - back panel

PAGE 1
BRIGHTON DAYBED HARDWARE 12 - screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED phillips head screwdriver Thank you for purchasing the Brighton Daybed. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON DAYBED bracket slot A back panel right side panel B front panel left side panel 1 A) With the assistance of another adult, fit brackets of back panel into corresponding slots of right side panel as shown. Make sure brackets are scurely engaged into slots by firmly pressing back panel down. B) Fit brackets of front panel into corresponding slots of right side panel as shown. Repeat steps for left side panel.