Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

CALAIS 38" HIGH DINING TABLE

HARDWARE

TOOLS REQUIRED

2 - nut wrench (provided)

Made in China 2004

Page 1 of 2

Thank you for purchasing the Calais 38" high table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

8 - nut

8 - long bolt

16 - short bolt

32 - cap

32 - washer

1 - table top

2 - center

connector

4 - leg

cap

long bolt

washer

cap

nut

washer

1 Place table top upside down on a clean, padded

surface. Attach each leg by inserting the hardware as

illustrated through each of the two holes. Secure

assembly by tightening bolt and nut using wrenches

on both sides of the leg.

COMPONENTS

PAGE 1
CALAIS 38" HIGH DINING TABLE HARDWARE 8 - nut 32 - washer 32 - cap 8 - long bolt 16 - short bolt COMPONENTS Thank you for purchasing the Calais 38" high table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
CALAIS 38" HIGH DINING TABLE washer short bolt cap 2 Align holes in first center connector with holes in legs. Secure center connector to each leg as illustrated. Tighten short bolt using wrench. 3 Align holes in second center connector with holes in legs. Secure center connector to each leg as illustrated. Tighten short bolt using wrench. 4 With the assistance of another adult, place the table upright. Page 2 of 2 Made in China 2004 Customer Service 800-967-6696 | http://www.crateandbarrel.