Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Checkers Black Three Cube

Customer Service 800-967-6696 | http://www.crateandbarrel.com

CHECKERS DOUBLE SHELVING

1 A) Insert 6 wood dowels into the ends of the 2 side panels.

B) Insert 6 wood dowels into the shelf.

C) Insert 4 wood dowels into the back panel.

Shelf

Side Panels

Back Panel

Made in Denmark r04

Page 1 of 3

Thank you for purchasing the Checkers Double

Shelving. This page

lists all the contents included in the

box. Please take the time

to identify the hardware as

well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

HARDWARE

COMPONENTS

2 - side panels

2 - end panels

(1 top, 1 bottom)

1 - shelf

1 - back panel

22 - wood

dowels

4 - screws

12 - cam

screws

2 - mending

plates

12 - cam

covers

12 - cams

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (10 pages)

PAGE 1
CHECKERS DOUBLE SHELVING HARDWARE Thank you for purchasing the Checkers Double Shelving. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
CHECKERS DOUBLE SHELVING NOTE: Do not over tighten the cam screws Arrow on each cam points towards nearest edge with holes Side Panels A Back Panel B End Panels 2 A) Insert 2 cam screws into each side panel as shown. Secure, but do not over tighten each cam screw with a phillips head screwdriver. B) Fasten 4 cam screws to the 2 end panels with a phillips head screwdriver. 3 Insert 4 cams into the large holes of the back panel as shown.
PAGE 3
CHECKERS DOUBLE SHELVING 6 Align dowels of shelf with corresponding holes in side panel and firmly fit into position. A 7 With the assistance of another adult, fit remaining side panel onto assembly. Make sure pilot holes on panel edge face back as shown. Lock top cams of each back panel by turning each clockwise with a phillips head screwdriver.
PAGE 4
CHECKERS TRIPLE SHELVING HARDWARE Thank you for purchasing the Checkers Triple Shelving. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 5
CHECKERS TRIPLE SHELVING Arrow on each cam points towards nearest edge with holes Side Panels NOTE: Do not over tighten the cam screws A Back Panels B End Panels 2 A) Insert 4 cam screws into each side panel as shown. Secure, but do not over tighten each cam screw with a phillips head screwdriver. B) Fasten 4 cam screws to the 2 end panels with a phillips head screwdriver. 3 Insert 4 cams into the large holes of each back panel as shown.
PAGE 6
CHECKERS TRIPLE SHELVING 6 Align dowels of shelves with corresponding holes in side panel and firmly fit into position. A 7 With the assistance of another adult, fit remaining side panel onto assembly. Make sure pilot holes on panel edge face back as shown. Lock top cams of each back panel by turning each clockwise with a phillips head screwdriver. B Make sure the pilot holes on the edge of the end panels face “back” as shown 8 A) Fit 2 end panels onto the assembly, aligning the cam screws and dowels.
PAGE 7
CHECKERS QUINTUPLE SHELVING HARDWARE Thank you for purchasing the Checkers Quintuple Shelving. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 8
CHECKERS QUINTUPLE SHELVING Side Panels NOTE: Do not over tighten the cam screws Arrow on each cam points towards nearest edge with holes A Back Panels B End Panels 2 A) Insert 6 cam screws into each side panel as shown. Secure, but do not over tighten each cam screw with a phillips head screwdriver. B) Fasten 4 cam screws to the 2 end panels with a phillips head screwdriver. 3 Insert 4 cams into the large holes of each back panel as shown.
PAGE 9
CHECKERS QUINTUPLE SHELVING Pilot holes face back 6 Align dowels of shelves with corresponding holes in side panel and firmly fit into position. 7 With the assistance of another adult, fit remaining side panel onto assembly. Make sure pilot holes on panel edge face back as shown. Lock top cams of each back panel by turning each clockwise with a phillips head screwdriver.
PAGE 10
CHECKERS TRIPLE, DOUBLE & SINGLE BASE ASSEMBLY Thank you for purchasing the Checkers Triple, Double or Single Base. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.