Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 Attach each leg to base with 1 long bolt using the

large allen wrench as shown.

Made in China - r02 Page 1 of 2

Thank you for purchasing the Cirque Side Table. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

CIRQUE SIDE TABLE

Missing hardware? Please call 800.606.6387 for replacements.

4 - short bolts 2 - long bolts

small allen wrench

(included)

large allen wrench

(included)

1 - tabletop

1 - base2 - legs

(1 left, 1 right)

base

left leg

NOTE: Do not

overtighten bolts.

right leg

Customer Service 800.967.6696 | www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

PAGE 1
CIRQUE SIDE TABLE HARDWARE 4 - short bolts 2 - long bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Cirque Side Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
CIRQUE SIDE TABLE 2 Attach tabletop to base assembly with 4 short bolts using a small allen wrench as shown. Assembly is now complete. tabletop CLEANING & CARE base assembly Made in China - r02 Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat and water. Customer Service 800.967.6696 | www.crateandbarrel.