Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Contour Hutch

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 4

Thank you for purchasing the Contour Hutch. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

CONTOUR HUTCH

Missing hardware? Please call 800.606.6387 for replacements.

4 - cam

screws

2 - side panels

(1 left, 1 right)

1 - shelf

1 - back

panel

8 - wood

dowels

4 - long

bolts

4 - flat

washers

4 - spring

washers

4 - short

bolts

4 - cams

8 - large

screws

1 A) Insert 2 cam screws and 2 wood dowels into left and

right side panels as shown. Secure cam screws, but do not

over tighten with a phillips head screwdriver.

B) Insert 4 cams and 4 wood dowels into shelf as shown.

Make sure arrow on each cam points towards the nearest

edge with holes.

2 - connecting

brackets

side panels

shelf

Make arrow on

each cam points

towards nearest

edge with holes

1 - top

panel

4 - metal

plates

2 - brackets

1 - wall

strap

1 - short

screw

1 - long

screw

1 - plastic

anchor

14 - short

screws

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench (included)

Summary of content (4 pages)

PAGE 1
CONTOUR HUTCH HARDWARE 4 - cam screws Thank you for purchasing the Contour Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
CONTOUR HUTCH 2 Fit cam screws of side panels and dowels of shelf together as shown. Turn each cam clockwise until it securely engages each cam screw, using a phillips head screwdriver. 3 Fit dowels of assembled unit as shown into corresponding holes in top panel. Secure top panel with 4 large bolts, 4 spring washers, and 4 flat washers as shown, using the allen wrench. hutch media stand 4 With the assistance of another adult, carefully place assembled unit face down as shown.
PAGE 3
CONTOUR HUTCH A C short screw anchor long D screw bracket F wall strap 6 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of hutch as shown, using 1 small screw. B) Determine the final location of hutch.
PAGE 4
CONTOUR HUTCH 7 If you purchased the complete Contour collection (media stand, hutch, audio stand, and audio tower), please proceed with the following instructions. Attach 4 metal plates onto assembled unit as shown. Secure plates with 2 short bolts as shown, using an allen wrench. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.