Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Large Allen wrench (included)

Small Allen wrench (included)

1 Attach top rail, lower back rail and lower front rail,

oriented as shown, to right side leg frame. Make sure the

holes on the lower rails face up and the holes in the top rail

face forward. Secure with 3 large machine screws and fully

tighten with the included large allen wrench.

6 - large

machine screws

Thank you for purchasing the Dockside Adirondack

Chair. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

1 - seat

2 - back panels

(1 left, 1 right)

2 - leg frames

(1 left, 1 right)

1 - top rail

1- lower back rail

1- lower front rail

Note hole orientations

on each rail

Missing hardware? Please call 800.606.6387 for replacements.

DOCKSIDE ADIRONDACK CHAIR

Page 1 of 2

Made in China

12 - small

machine screws

12 - wooden

plugs

PAGE 1
DOCKSIDE ADIRONDACK CHAIR HARDWARE 6 - large machine screws 12 - small machine screws 12 - wooden plugs Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Dockside Adirondack Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DOCKSIDE ADIRONDACK CHAIR 2 Attach left side leg frame to assembly with 3 large machine screws. Fully tighten all screws with the large allen wrench. 3 Lay the frame assembly on its side. Fit seat into position on top of front and back lower rails. Secure with 4 small machine screws. A B 5 Conceal all exposed screw heads with wooden plugs. Assembly is now complete. 4 A. Place 2 back panels into position, oriented as shown.