Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
4 A. Place 2 back panels into position, oriented as shown.
Secure by inserting 2 small machine screws per panel
through the underside of the seat panel.
B. Secure back panels to the top rail with 2 small machine
screws per panel.
DOCKSIDE ADIRONDACK CHAIR
Page 2 of 2
Made in China
2 Attach left side leg frame to assembly with 3 large
machine screws. Fully tighten all screws with the large
allen wrench.
3 Lay the frame assembly on its side. Fit seat into position
on top of front and back lower rails. Secure with 4 small
machine screws.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer. This chair
should be used in protected outdoor or indoor locations
and stored indoors.
5 Conceal all exposed screw heads with wooden plugs.
Assembly is now complete.
A
B