Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r06 Page 1 of 2

Thank you for purchasing the Drake Office Chair. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DRAKE OFFICE CHAIR

Missing hardware?

Please call 800.606.6387 for replacements.

1 - piston 1 - leg base

1 - back

5 - wheels

1 - seat

2 - arms

(1 left, 1 right)

1 A) Insert 5 wheels into leg base as shown. Firmly

press each wheel into corresponding hole to secure.

B) Insert piston into leg base assembly as shown.

Press firmly to secure.

1 - adjustment

mechanism

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

small allen wrench

(included)

large allen wrench

(included)

4 - arm

bolts

4 - large

bolts

4 - small

bolts

PAGE 1
DRAKE OFFICE CHAIR HARDWARE 4 - arm bolts 4 - large bolts 4 - small bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Drake Office Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DRAKE OFFICE CHAIR FRONT FRONT Install bolts in each corner as shown Install bolts in middle holes as shown TOP VIEW small bolt NOTE: Do not over tighten the bolts BACK TOP VIEW BACK large bolt SIDE VIEW back front SIDE VIEW 2 Attach adjustment mechanism to bottom of seat as shown with 4 small bolts. Secure, but do not over tighten, bolts with an small allen wrench. 3 Attach back to adjustment mechanism as shown with 4 large bolts. Secure bolts with an small allen wrench.