Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Taiwan - r02 Page 1 of 2

1 With the assistance of another adult, place tabletop

upside down onto a clean, padded surface. Slide

support frames out and insert 2 stop bolts into table-

top as shown. Turn stop bolts clockwise to secure.

Thank you for purchasing the Drop Leaf Kitchen

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

DROP LEAF KITCHEN TABLE

2 - stop

bolts

20 - small

bolts

1 - support frame

1 - tabletop

stop

bolt

2 - legs (A)

2 - legs (B)

support

frame

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench (included)

PAGE 1
DROP LEAF KITCHEN TABLE HARDWARE 2 - stop bolts 20 - small bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Drop Leaf Kitchen Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
DROP LEAF KITCHEN TABLE leg (B) leg (A) leg (A) 2 Attach 2 legs (A) to corresponding label on tabletop with 3 small bolts as shown. Secure, but do not over tighten, bolts with an allen wrench. Repeat steps for legs (B). leg (B) B A A B DROP LEAF support frame 90º support frame To release leaf, hold leaf steady and push support frame into tabletop. Carefully, drop leaf into 90º position. If desired, repeat steps for remaining leaf. Make sure to release each leaf separately.