Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Ellis Hutch

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ELLIS HUTCH

COMPONENTS

Made in China - r06

Page 1 of 3

1 - door

assembly

1 - back

frame

Thank you for purchasing the Ellis Hutch. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

2 - shelves

1 - top

panel

1 - bottom

panel

1 - right

side panel

1 - left

side panel

1 A. With the assistance of another adult, lay door

assembly face down as shown. Fit right and left side

panels into position and attach with 4 large bolts, 4 split

washers and 4 washers per panel. Secure each screw with

a phillips head screwdriver.

B. Fit bottom panel into slot at base of door assembly. Make

sure slot on the bottom panel faces up and secure with 4

long wood screws.

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

24 - washers

2 - door pulls 2 - metal brackets

Missing hardware? Please call 800.606.6387 for

replacements.

24 - split

washers

16 - large

bolts

8 - long

wood screws

8 - small

bolts

8 - shelf pins

10 - short

wood screws

x 8

x 4

Summary of content (3 pages)

PAGE 1
ELLIS HUTCH HARDWARE 24 - washers 10 - short wood screws Thank you for purchasing the Ellis Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ELLIS HUTCH A x8 A B x8 x4 View from below 2 A. With the assistance of another adult, place back frame face up and position case assembly as shown. Insert 8 large bolts, 8 split washers and 8 washers through the inside of side frames and secure each with a phillips head screwdriver. B. Fasten bottom panel to back panel with 4 long wood screws. Secure with a phillips head screwdriver. 3 With the assistance of another adult, place case assembly upright.
PAGE 3
ELLIS HUTCH ADJUSTING THE HINGES If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. A Adjusts door forward or backward B Adjusts door right or left C A B C Adjusts door up or down Made in China - r05 Page 3 of 3 Customer Service 800-967-6696 | http://www.crateandbarrel.