Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
ASSEMBLY
1 - seat
allen wrench (included)
1 - leg
frame
leg frame
spring washer
large bolt
seat
flat washer
Made in China - r04 Page 1 of 1
Thank you for purchasing the Felix Barstool (24” and
30”). This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
FELIX BARSTOOL (24” AND 30”)
Missing hardware? Please call 800.606.6387 for replacements.
4 - bolts 4 - spring
washers
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
4 - flat
washers
A. Place seat upside down onto a clean, padded surface as
shown. Align holes in leg frame over holes in bottom of seat
as shown.
B. Loosely insert 4 bolts, 4 spring washers and 4 flat
washers through holes in leg frame into seat as shown.
C. Make any necessary adjustments to the seat and frame.
Fully tighten all 4 bolts with the allen wrench. Position unit
upright. NOTE: Bolts should be periodically tightened.
Assembly is now complete.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE:
Before assembly, carefully
remove all packaging to avoid
damage to seat and leg frame.