Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 Fit 3 horizontal crossbars and 2 vertical crossbars

onto the brackets as shown. Loosely attach each

crossbar with 2 small bolts. Do not fully tighten the bolts.

Thank you for purchasing the Flex Desk. This page lists

all the contents included in the box. Please take time to

identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - desktop glass

1 - rear frame

1 - front frame

TOOLS REQUIRED

Allen Wrench (included)

Hex Wrench (included)

2 - return

crossbars

1 - pivot crossbar

x 10

1 - return glass

1 - right return leg1 - left return leg

FLEX DESK

Page 1 of 2

Made in Taiwan- r03

Missing hardware? Please call 800.606.6387 for

replacements.

32 - small

bolts

1 - large

bolt

10 - rubber

bumpers

1 - caster 1 - locking

caster

1 - washer

2 - split

washers

3 - horizontal crossbars

2 - vertical crossbars

PAGE 1
FLEX DESK HARDWARE 32 - small bolts 1 - large bolt 10 - rubber bumpers Thank you for purchasing the Flex Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
FLEX DESK x 20 IMPORTANT NOTE: Make sure pivot shaft faces up as shown A B 2 Fit brackets of front frame into ends of crossbars. Secure each crossbar with 2 bolts, fully tightening with the allen wrench. At this point, fully tighten 10 bolts installed in Step 1 with the allen wrench. 3 A. Fit 2 return crossbars and 1 pivot crossbar onto corresponding brackets on the right and left return frames as shown. Secure with 4 short bolts per crossbar, fully tightening each with the allen wrench. B.