Assembly Instruction

TOOLS REQUIRED

COMPONENTS

ASSEMBLY

Made in China - r03 Page 1 of 3

Thank you for purchasing the Hammock Stand. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

HAMMOCK STAND

rubber mallet

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

pole insert

2 - wheel

caps

2 - hooks

1 - hammock

(sold separately)

2 - wheels

2 - pole inserts

3 - pole sleeves

2 - leg assemblies

(1 left, 1 right)

pole sleeve

1 - pole insert

with axle

base pole

assembly

right leg

assembly

left leg

assembly

spring pin

2 - washers

1 Fit pole insert into pole sleeve as shown. To secure, push

poles together until spring pin of pole insert locks into hole of

pole sleeve. Make sure spring pin is securely engaged.

UNLOCKED

2 Attach left leg assembly to base pole assembly as

shown. Make sure spring pin of left leg assembly securely

engages hole of base pole assembly.

Repeat for right leg assembly.

LOCKED

PAGE 1
HAMMOCK STAND TOOLS REQUIRED rubber mallet COMPONENTS 2 - wheels 1 - hammock (sold separately) 2 - hooks 1 - pole insert with axle 2 - washers Thank you for purchasing the Hammock Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
HAMMOCK STAND 3 Attach 1 pole insert with axle to left leg assembly as shown. Make sure spring pin of left leg assembly securely engages hole of pole insert with axle. B) Attach 1 pole insert to right leg assembly. Make sure spring pin of right leg assembly securely engages hole of pole insert. pole insert B pole insert with axle A right leg assembly left leg assembly 4 A) Attach 1 pole sleeve to pole insert with axle as shown.
PAGE 3
HAMMOCK STAND 5 Attach chain of hammock (sold separately) to hooks at desired height tension. Make sure chain is securely attached to each hook. NOTE: Take extreme caution when sitting in your hammock for the first time. Hammock will stretch. Once initial stretching occurs, tighten hammock chains to adjust to desired height tension. Assembly is now complete. hammock (sold separately) CLEANING AND CARE CAUTION Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.