Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HAVANA HUTCH

Made in Indonesia R03 Page 1 of 3

Thank you for purchasing the Havana Hutch. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

2 - side panels 1 - front panel

1 - back panel

1 - top panel

1 - top shelf

1 - rail

6 - pan

head bolts

16 - flat

head bolts

6 - small

wood screws

2 - L plates 8 - small

washers

22 - large

washers

Interchangeable Phillips/flat head screwdriver (included)

8 - large

wood screws

1 - bottom shelf

PAGE 1
HAVANA HUTCH HARDWARE Thank you for purchasing the Havana Hutch. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
HAVANA HUTCH x8 1 With assistance of another adult, carefully lay back panel on padded surface. Align both side panels with corresponding holes in back panel and loosely attach with 8 flat head bolts and 8 large washers. Do not fully tighten the bolts. 2 Fit front panel onto assembled unit and loosely attach with 8 flat head bolts and 8 large washers. Do not fully tighten bolts. x6 3 Loosely attach top panel with 6 pan head bolts with 6 large washers as illustrated. Do not fully tighten bolts.
PAGE 3
HAVANA HUTCH 5 Insert the bottom shelf, followed by the top shelf onto the support rails, as illustrated above. Make sure the groove is at the back of each shelf. Attach with 8 large wood screws and 8 small washers. 6 With the assistance of another adult, place assembly upright. Insert wood rail into brass fittings on each side panel as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.