Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Allen wrench (included)

1 Slide 2 leg supports onto each leg. Make sure wide side

of support faces up as illustrated.

Thank you for purchasing the Infinity Chair. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

COMPONENTS

1 - seat

1 - lower leg

1 - small

screw

1 - upper leg

INFINITY CHAIR

Page 1 of 3

Made in Taiwan

5 - split washers

4 - feet

4 - large

screws

4 - leg mounts

x 4

Missing hardware? Please call 800.606.6387 for replacements.

4 - leg supports 4 - mounting plates

Wide side

faces up

PAGE 1
INFINITY CHAIR HARDWARE 5 - split washers 1 - small screw 4 - large screws 4 - feet 4 - leg mounts 4 - leg supports 4 - mounting plates Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Infinity Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
INFINITY CHAIR Small hole faces up A x4 B Align these holes C 2 A. Fit leg mount onto the leg and slide past the hole in the leg. Make sure the small hole in the leg mount faces up. B. Place the mounting plate onto the leg as shown, aligning hole in plate with the hole in the leg. C. Slide the leg mount over the mounting plate as shown, aligning hole in leg mount with hole in the mounting plate and leg.
PAGE 3
INFINITY CHAIR x5 5 Secure leg assembly with 1 short screw and 1 split washer. Fully tighten all 5 screws with allen wrench provided. 6 Insert 4 feet into the legs. Gently tap with a hammer if necessary. IMPORTANT: After tightening all screws, slide all 4 leg supports towards the center until they can no longer be moved. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.